Parts or Resin?

COR photopolymer resins are intended for use by trained additive manufacturing professionals working in industrial, manufacturing, and laboratory facilities. At this time, we discourage printing with COR in home or office environments. COR photopolymers are not for children, nor for adults who act like children.

We reserve the right to cancel your resin purchase if you cannot meet the safety requirements. If you do not have access to this type of facility or training, we would be delighted to print COR parts for you at polyspectra.com/start-here !

If you are interested in printing with COR photopolymer resins in your facility, you must be able to affirm the following:

  1. You are a trained additive manufacturing professional in a facility that meets the facility requirements
  2. You have access to the required equipment to successfully and safely store, handle, print, clean, post-cure, and dispose of COR
  3. You will use the required personal protective equipment (PPE) while handling COR

If you cannot affirm all of the above, our recommendation is for you to get started by buying printed parts .

If you do not have access to this type of training/equipment/facility, we would be happy to print COR parts for you.

Get an instant quote today at https://polyspectra.com/start-here!